Springfield Armory Holsters

(8 customer reviews)

$64.98

Springfield Armory Holsters
| Outside the waistband | OWB |
| Inside the waistband | IWB | concealed carry kydex holsters |
Please check out | Holster Type FAQ |and the |Vlog | for information about our products
More information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page

Please read the description at the bottom of the page
Made in America

 

 

SKU: 7765 Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Springfield Armory Holsters

The DME Holster’s Springfield Armory kydex Holster is American made. The Springfield holsters is perfect for concealed carry inside the waistband and outside the waistband. In addition our holsters are purposely designed. And they can be carried at 3 to 4 o’clock but can be ordered for appendix carry. Used with the nylon injection molded belt clip or soft loops. DME holsters offers a non tuckable ang tuckable easy on and off holster. Above all our SA kydex holsters are designed to be a perfect fit for The SA line of firearms.

Available holsters for Springfield Armory firearms

Springfield Armory 911 .380 Springfield Armory 1911 3″ w/o Rail Springfield Armory TRP 1911 5″ w/Rail Springfield Armory EMP 9mm 4″. SA XD 9/40 3″ Springfield Armory XD 9/40/357/45 4″ Springfield Armory XD 9/40 5″ Springfield Armory XD MOD 2 3.0″ 9/40 Springfield Armory XD MOD 2 3.3″ 45 Springfield Armory XD MOD 2 4″ 9/40
After that Springfield Armory XD MOD 2 5″ 9/40 Springfield Armory XDM 3.8″ 9/40/45 Springfield Armory XDM 4.5″ 9/40/45 SA XDM 9/40 5.25″ Springfield Armory XDM 10mm 5.25″. Springfield Armory XDS 3.3″ 9/40/45 Springfield Armory XDS M2 3.3″ 9/40/45 Springfield Armory XDS 4″ 9/40/45 Springfield Armory XDE 3.3″ 9/40 Springfield Armory XDE 3.3″ 45. In conclusion SA Kydex holsters

 

We also make holsters for the:

Safari land ALS System and BladeTech Tactical Modular Mount System TMMS
Stream light TLR 6 TLR 1 TLR 2 TLR 3 TLR 4 and other rail mounted lights.

Our SA kydex holsters can be ordered for concealed carry CCW. And outside the waistband OWB for an open carry holster. Holsters can be order straight up and down at 0° for appendix carry. Or with approximately 15° cant for 3 o’clock or 4 o’clock carry. And for extra concealed ability you can also order the Mod Wing.

Need more information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page

Just a quick word about shipping times we are a small company and most the stuff that we do custom work. We offer a quality product at affordable prices that is in high demand. Holsters are made on a first-come first-served basis. We try to update our shipping times once a month. We get multiple phone calls requesting to be moved to the front of line for some extra cash that’s just not something that we can do. Orders are completed in sequence unless something is on back order i.e. you order a custom color.

The Springfield Armory holsters are made out of  black .080/.093 Boltaron or Kydex. It’s very strong, has excellent durability, scratch resistance, and good definition. In conclusion excellent holster. Springfield Armory kydex holster

Holster Type FAQ

All Springfield Armory Holsters come standard with:

  • Made with Black .080/.093 Boltaron or Kydex  View Colors/ Patterns here
  • Nylon belt attachment your choice 0° appendix carry, or approximately 15° FBI Cant
  • Sweat guard
  • Adjustable retention
  • Standard screw set
  • Springfield Armory holsters
  • Made in America

 

Holster description

Standard IWB

Use: Concealed carry, Non-Tuckable, Comfort level 7
Concealability 8 (add the mod wing you could push it to 9.5)

The Standard IWB is a “Taco” holster designed to be carried at 3 or 4 o’clock with 15° cant. However, can be ordered at 0° cant for 1 o’clock appendix carry. Holster is non tuck-able, what this means is that you cannot tuck a shirt in over the gun. It’s designed to have a shirt hang/drape over the holster. All DME Holsters are designed with a full sweat guard, inside mag release uncovered, adjustable retention, trigger guard covered, and barrel enclose with a quarter inch slit for cleaning. Made out of .080 Kydex/Boltaron.
Available belt attachments: FOIM belt clips in 1.5” or 1.75”, 2 Soft belt loops accommodate up to a 1.75” belt. Belt attachments are attached to the top of the holster.
Available left or right-handed Springfield Armory kydex holster

The Mod Wing

For extra concealability you can also order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. This creates better concealment and less printing of the firearm/Grip. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire. The mod wing is an independent piece of hardware that can be removed if ordered with the holster. The Mod Wing cannot be added to holster if it was not originally ordered with one. Holsters are cut differently without the Mod Wing.

Standard AIWB

Use: Concealed carry, Non-Tuckable, Comfort level 7
Concealability 8 (add the mod wing you could push it to 9.5)

Designed to be carried at 1 o’clock, appendix carry however, can be worn at any position on the body. It is a tuck-able holster. The Standard AIWB has the same design characteristics as the Standard IWB. The difference is in the mounting and type of belt attachments. The belt attachment is mounted on the bottom of the holster on or just under the barrel. The gap that is created between the attachment in the holster is what allows the holster to be a tuck-able holster. We only use one J hook or strut.
Available belt attachments J Hooks 1.5” or 1.75”, 1 Strut and soft belt loop with pull the dot snap will accommodate up to 1.75” belt, Fat Clip accommodates up to a 1.75” belt. Ulti Clips.
Available left or right-handed

The Mod Wing

For extra concealability you can also order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. This creates better concealment and less printing of the firearm/Grip. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire. The mod wing is an independent piece of hardware that can be removed if ordered with the holster. The Mod Wing cannot be added to holster if it was not originally ordered with one. Holsters are cut differently without the Mod Wing.

 

Standard OWB

Use: Opened carry, Range holster, Duty holster, Comfort level 9, Concealability 3

The Standard OWB has the same design characteristics as the Standard IWB. The holster looks the same as the AIWB or IWB. The differences are in the belt attachments and material thickness. The standard outside the waistband holster is made out of .093 Kydex/Boltaron. When possible, belt attachment points are reinforced. This is the weakest part of the holster. This reinforcement eliminates that.
Available belt attachments Combat loop, Tek-Lok, Drop & offsets, Paddles, TIMMS system QLS System Speed Clips and a few others. Most will accommodate up to a 2” belt.
Holsters can also be ordered with level ll retention.

Pancake Holster

Use: Open carry, Concealed carry, Comfort level 8, Concealability 6.5-8.5

The Pancake holster has all the same design characteristics as the Standard IWB. The difference is that it is not a “taco” holster. The gun is sandwiched between two pieces of .080 Kydex/Boltaron and riveted on the sides. (Maybe it should be called a sandwich holster.) Weight of the gun is distributed over 4 to 6 inches. Our pancake holster design is slightly different than most. To help with comfort and concealability the front wing is set at 35°, the back wing is set at 20°. “Wings are where the rivets go”. What this does is allows your belt to pull the back of the holster closer to your body. This is to help keep the grip from printing if you’re wearing it outside the waistband with a shirt draped over it. The gun is generally straight up and down in the holster. Small guns without lights or lasers will be tilted in the holster about 5°. Belt attachments are attached to the rivets. Depending on how many rivets are forward or back of the holster, ride height can be adjusted simply by moving the belt attachment up or down the rivets. Cant is achieved by offsetting the belt attachments. Holsters are shipped with belt attachments offset ¾ of an inch which is about 10° cant. Available left or right-handed. Belt attachments Speed Clips, Flat Loops, Infinity loops and belt loops. All available in 1.5 to 1.75 inch.

The pancake holster can also be converted into a inside the waistband holster. (IWB). All one needs to do is remove you’re outside the waistband attachments and install J hooks or struts with soft belt loops on the front side of the holster. We sell kits for that. You may also need to round some of the lower corners on your holster to aid in comfort while wearing it inside the waistband. This can be done simply by sanding. Start with 220 grit then 400.

If you don’t see what you are looking for please call or Text 520 815 6940 or e mail Sales@dmeholsters.com

Check out the DME Holster List

All DME Holsters have a limited lifetime warranty! See the warranty page.

Please note any holster or mag carrier ordered color/print other than black is special order and nonrefundable.

The DME Holsters Standard IWB OWB S&W M&P Kydex holsters are perfect for everyday carry. All Springfield Armory kydex holster can be outfitted with the popular lasers and lights in addition from a variety of manufacturers such as Stream light CrimsonTrace laserMax ect. Order holsters with lights & lasers here dmeholsters.com  We can also make off brand lights depending on the cost to acquire the light. Please feel free to contact If you are not finding what you’re looking for or you need more information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page After that Springfield Armory kydex holster. Springfield Holsters

 

American Made

Additional information

Weight 14.0 oz
Dimensions 10 × 6 × 4 in
Brand

DME Holsters

Manufacturer

DME Holsters

Share your thoughts!

4.75 out of 5 stars

8 reviews

Let us know what you think...

What others are saying

  1. Jeffrey Baca

    Jeffrey Baca (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped before estimated ship time

    Excellent holster fits perfect retention.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. chris littrell

    XDM W/Light

    chris littrell

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped before estimated ship time

    This is my 2nd holster ordered from DME and I’m quite impressed, will probably order again for another SA pistol with attachments. The reason for the 4 stars…quality and fit but, retention isn’t as snug as the 1st one I bought and thought the holster was a little long, overhanging muzzle and light by about 3/8 inch. The gun is already large and difficult to conceal. Trying not to be nit-picky – again, overall very satisfied.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Ryan

    Would recommend

    Ryan (verified owner)

    Customer service Extremely Satisfied

    Customer service response time More than one day

    Quality of product Excellent

    Shipping time Shipped after estimated ship time

    I’m going to start with, this is an excellent quality holster
    PROS:
    Fits my xd9 subcompact with o-light like a glove! Excellent retention adjustment and a solid click when inserting the firearm into the holster, with no play whatsoever.
    There is not many companies that offer a light bearing holster for the springfield xd model firearms, and the ones I have tried, were in my opinion not good quality.
    I want to rate this holster 5 stars!
    CONS:
    The only reason it gets 4 stars is because of the lead time! My holster took 19 weeks for me to recieve it, which was 5 weeks past their estimated Shipp time at that time. that is not an exaggeration. I am actually very happy I waited nonetheless. If they can improve their shipping times, this would be my 100% go to. Although I will likely purchase from DME again, I will definitely have to consider if I am willing to wait on the potentially long lead times.
    Still extremely happy with the quality!!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Erik

    XDm 5.25 holster

    Erik (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped at the estimated ship time

    I needed a holster for my XDm/light combination and DME was one of the only companies that made one. My rig fits like a glove and I was happy that they could install the mounting system I needed.
    I did trim the sweat guard off the top but that’s a personal preference.
    Couldn’t be happier with the holster overall. Good retention and DME was helpful with some changes I wanted to make after my initial order. I will buy from DME for future needs.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Chris Mills

    1911 springfield range officer elite operator 10 mm

    Chris Mills (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped at the estimated ship time

    The fit and quality was more than what I was expecting. This was the first time dealing with dme holster Tim answer all my questions the videos helped a lot with questions and a idea of what to expect

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Joshua K

    High Quality

    Joshua K

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped at the estimated ship time

    This is an excellent holster. I ordered one with a WRS style hood for a duty belt setup. Couldn’t be happier. Highly recommended.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Jon R.

    Awesome!

    Jon R. (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped at the estimated ship time

    First, great customer service! I can not express enough how great it was. Took the time to explain everything. Also the product was out standing, totally worth the wait.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Duncan Popkins

    Great holster

    Duncan Popkins (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped in 2 weeks

    Perfect fit for my gun and the assorted attachments I have on it. They worked with me to make sure it would be the best fit possible and I greatly appreciate it. Definitely recommend their products and will use them for future purchases as well.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up